From 257f737541ccd425ce2b227b7fa7c53f5b441510 Mon Sep 17 00:00:00 2001 From: mcgurk Date: Mon, 5 Sep 2016 23:47:35 +0300 Subject: [PATCH] Update README.md --- README.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/README.md b/README.md index 84e79df..554c6de 100644 --- a/README.md +++ b/README.md @@ -29,7 +29,7 @@ https://www.arduino.cc/en/Main/Software In Arduino IDE you have to select board. On my case some reason "Arduino Leonardo" selections works better than "Arduino/Genuino Micro". With Leonardo-setting RX and TX leds are normally off and blinks when data is transfered to/from USB. With Micro-setting LED's are normally on and they blinks to off when data is transferring. - Tools->Port->COMx -In Windows Arduino IDE shows only available com-ports. In most cases it's biggest numbered COM-port. When I tested with RetrOrangePi (Raspbian Linux), port was ttyACM0. +In Windows Arduino IDE shows only available com-ports. In most cases it's biggest numbered COM-port. COM-port number can change when you start to programming first time (COM-port number can be different after joystick-features are enabled). When I tested with RetrOrangePi (Raspbian Linux), port was ttyACM0. Install joystick library (instructions for installing library: todo): https://github.com/MHeironimus/ArduinoJoystickLibrary