From 23c1ef9c11bd47a3e43cbcb3096f4ae7571f9236 Mon Sep 17 00:00:00 2001 From: mcgurk Date: Tue, 6 Sep 2016 13:12:44 +0300 Subject: [PATCH] Update README.md --- README.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/README.md b/README.md index 267c6a4..95d8ca9 100644 --- a/README.md +++ b/README.md @@ -42,7 +42,7 @@ You can use any IO-pins, but try to avoid pins 0 and 1. They are serial port TX - Tools->Board->Arduino Leonardo - In Arduino IDE you have to select board. On my case some reason "Arduino Leonardo" selections works better than "Arduino/Genuino Micro". With Leonardo-setting RX and TX leds are normally off and blinks when data is transfered to/from USB. With Micro-setting LED's are normally on and they blinks to off when data is transferring. + In Arduino IDE you have to select board. In my case some reason "Arduino Leonardo" selections works better than "Arduino/Genuino Micro". With Leonardo-setting RX and TX leds are normally off and blinks when data is transfered to/from USB. With Micro-setting LED's are normally on and they blinks to off when data is transferring. - Tools->Port->COMx