/* Name: usbconfig.h * Project: AVR USB driver * Author: Christian Starkjohann, Modified by Raphael Assenat * Creation Date: 2005-04-01 * Tabsize: 4 * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH * License: Proprietary, free under certain conditions. See Documentation. * This Revision: $Id: usbconfig.h,v 1.6 2009-05-02 12:07:46 cvs Exp $ */ #ifndef __usbconfig_h_included__ #define __usbconfig_h_included__ /* General Description: This file contains parts of the USB driver which can be configured and can or must be adapted to your hardware. */ /* ---------------------------- Hardware Config ---------------------------- */ #define USB_CFG_IOPORT PORTD /* This is the port where the USB bus is connected. When you configure it to * "PORTB", the registers PORTB, PINB (=PORTB+2) and DDRB (=PORTB+1) will be * used. */ #define USB_CFG_DMINUS_BIT 0 /* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected. * This MUST be bit 0. All other values will result in a compile error! */ #define USB_CFG_DPLUS_BIT 2 /* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected. * This may be any bit in the port. Please note that D+ must also be connected * to interrupt pin INT0! */ /* --------------------------- Functional Range ---------------------------- */ #define USB_CFG_HAVE_INTRIN_ENDPOINT 1 /* Define this to 1 if you want to compile a version with two endpoints: The * default control endpoint 0 and an interrupt-in endpoint 1. */ #define USB_CFG_IMPLEMENT_HALT 0 /* Define this to 1 if you also want to implement the ENDPOINT_HALT feature * for endpoint 1 (interrupt endpoint). Although you may not need this feature, * it is required by the standard. We have made it a config option because it * bloats the code considerably. */ #define USB_CFG_INTR_POLL_INTERVAL 10 /* If you compile a version with endpoint 1 (interrupt-in), this is the poll * interval. The value is in milliseconds and must not be less than 10 ms for * low speed devices. */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ #define USB_CFG_MAX_BUS_POWER 120 /* Set this variable to the maximum USB bus power consumption of your device. * The value is in milliamperes. [It will be divided by two since USB * communicates power requirements in units of 2 mA.] */ #define USB_CFG_SAMPLE_EXACT 1 /* This variable affects Sampling Jitter for USB receiving. When it is 0, the * driver guarantees a sampling window of 1/2 bit. The USB spec requires * that the receiver has at most 1/4 bit sampling window. The 1/2 bit window * should still work reliably enough because we work at low speed. If you want * to meet the spec, set this value to 1. This will unroll a loop which * results in bigger code size. * If you have problems with long cables, try setting this value to 1. */ #define USB_CFG_IMPLEMENT_FN_WRITE 0 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of * bytes. */ #define USB_CFG_IMPLEMENT_FN_READ 0 /* Set this to 1 if you need to send control replies which are generated * "on the fly" when usbFunctionRead() is called. If you only want to send * data from a static buffer, set it to 0 and return the data from * usbFunctionSetup(). This saves a couple of bytes. */ /* -------------------------- Device Description --------------------------- */ /* We cannot use Obdev's free shared VID/PID pair because this is a HID. * We use John Hyde's VID (author of the book "USB Design By Example") for * this example instead. John has offered this VID for use by students for * non-commercial devices. Well... This example is for demonstration and * education only... DO NOT LET DEVICES WITH THIS VID ESCAPE YOUR LAB! * The Product-ID is a random number. */ #define USB_CFG_VENDOR_ID 0x81, 0x17 /* USB vendor ID for the device, low byte first. If you have registered your * own Vendor ID, define it here. Otherwise you use obdev's free shared * VID/PID pair. Be sure to read USBID-License.txt for rules! */ #define USB_CFG_DEVICE_ID 0x9d, 0x0a /* This is the ID of the product, low byte first. It is interpreted in the * scope of the vendor ID. If you have registered your own VID with usb.org * or if you have licensed a PID from somebody else, define it here. Otherwise * you use obdev's free shared VID/PID pair. Be sure to read the rules in * USBID-License.txt! */ #define USB_CFG_DEVICE_VERSION 0x02, 0x01 /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'r', 'a', 'p', 'h', 'n', 'e', 't', '.', 'n', 'e', 't' #define USB_CFG_VENDOR_NAME_LEN 11 /* These two values define the vendor name returned by the USB device. The name * must be given as a list of characters under single quotes. The characters * are interpreted as Unicode (UTF-16) entities. * If you don't want a vendor name string, undefine these macros. * ALWAYS define a vendor name containing your Internet domain name if you use * obdev's free shared VID/PID pair. See the file USBID-License.txt for * details. */ #define USB_CFG_DEVICE_NAME '4','n','e','s','4','s','n','e','s' #define USB_CFG_DEVICE_NAME_LEN 9 /* Same as above for the device name. If you don't want a device name, undefine * the macros. See the file USBID-License.txt before you assign a name. */ #define USB_CFG_SERIAL_NUMBER_LENGTH 4 /* Set this define to the number of charcters in the serial number if your * device should have a serial number to uniquely identify each hardware * instance. You must supply the serial number in a string descriptor with the * name "usbCfgSerialNumberStringDescriptor", e.g.: * #define USB_CFG_SERIAL_NUMBER_LENGTH 5 * int usbCfgSerialNumberStringDescriptor[] PROGMEM = { * USB_STRING_DESCRIPTOR_HEADER(USB_CFG_SERIAL_NUMBER_LENGTH), * '1', '2', '3', '4', '5' * }; * See usbdrv.h for more information about the USB_STRING_DESCRIPTOR_HEADER() * macro or usbdrv.c for example string descriptors. * You may want to put "usbCfgSerialNumberStringDescriptor" at a constant * flash memory address (with magic linker commands) so that you don't need * to recompile if you change it. */ #define USB_CFG_DEVICE_CLASS 0 /* specify the class at the interface level */ #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. */ #define USB_CFG_INTERFACE_CLASS 0x03 /* HID class */ #define USB_CFG_INTERFACE_SUBCLASS 0 /* no boot interface */ #define USB_CFG_INTERFACE_PROTOCOL 0 /* no protocol */ /* See USB specification if you want to conform to an existing device class or * protocol. */ //#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 42 /* Define this to the length of the HID report descriptor, if you implement * an HID device. Otherwise don't define it or define it to 0. */ /* Define this if you want to be able to set the report descriptor * dynamically at runtime. * */ #define USB_CFG_HID_REPORT_DESCRIPTOR_RUNTIME /* Define this if you want to be able to set the device descriptor * dynamically at runtime. */ #define USB_CFG_DEVICE_DESCRIPTOR_RUNTIME #endif /* __usbconfig_h_included__ */