Adapt various input devices to various output devices. https://github.com/OpenRetroPad/OpenRetroPad
Go to file
Travis Burtrum a4cb9d52c4 Remap SNES to free up some pins for analog/digital output in the future 2020-12-29 19:57:28 -05:00
hwids Customize USB vid/pid/manufacturer/product 2020-12-21 21:29:15 -05:00
images Pinout images 2020-12-27 20:23:46 -05:00
include Initial commit 2020-12-04 20:56:25 -05:00
lib Initial commit 2020-12-04 20:56:25 -05:00
src Remap SNES to free up some pins for analog/digital output in the future 2020-12-29 19:57:28 -05:00
test Initial commit 2020-12-04 20:56:25 -05:00
.clang-format Initial commit 2020-12-04 20:56:25 -05:00
.gitignore Initial commit 2020-12-04 20:56:25 -05:00
CMakeLists.txt Initial commit 2020-12-04 20:56:25 -05:00
code-format.sh Initial commit 2020-12-04 20:56:25 -05:00
license.md Add readme and license 2020-12-20 01:25:16 -05:00
platformio.ini Add dongle detection and OhmMeter utility 2020-12-29 01:28:00 -05:00
readme.md Remap SNES to free up some pins for analog/digital output in the future 2020-12-29 19:57:28 -05:00
sdkconfig.defaults Initial commit 2020-12-04 20:56:25 -05:00

readme.md

OpenRetroPad

Adapt various input devices to various output devices.

Currently supported inputs: SNES/NES, Sega Genesis/Megadrive/Atari, Playstation (and PS2) Digital and Dual shock, Nintendo 64, Nintendo Gamecube

Currently supported outputs: bluetooth-hid gamepad, usb-hid gamepad, nintendo switch usb gamepad, wireless usb-hid gamepad over radio

Build using PlatformIO using pio run or pio run -e $board-$input-$output for a specific target/env.

env's are laid out like $board-$input-$output supported values:

  • $board: micro, esp32
  • $input: snes, genesis, psx, n64, gc, radio, debug
  • $output: radio, usb, usbradio, switchusb, bt, debug
  • please note not all boards are compatible with all inputs/outputs, for example esp32 can only do bt, micro can only do radio or usb

Wiring

(quick plea: if you are good at drawing diagrams, please help!)

DB-25 Pinout

DB-25 Pins Arduino Pro Micro GPIO ESP32 GPIO Radio SNES PSX N64 Gamecube Genesis
1 TX 1 1 - LATCH - - - P1-1
2 SDA 2 21 - CLOCK DATA DATA1 DATA1 P1-3
3 SCL 3 22 - DATA1 CMD - - P1-4
4 Analog 4 15 - DATA2 ATT - - P1-6
5 Digital 5 16 - DATA3 CLK - - P1-7
6 Analog 6 2 - DATA4 - - - P1-9
7 Digital 7 17 CE - - - - P2-7*
8 Analog 8 4 CSN - - - - -
9 Analog 9 > 1k Ω 35 > 1k Ω - 330 Ω 100 Ω 220 Ω 680 Ω 470 Ω
10 Analog 10 32 - - - - - -
11 RX 0 3 - - - - - P1-2
12 - - - - - - - - -
13 - - - - - - - - -
14 MISO 14 12 MISO - - - - P2-6*
15 SCLK 15 14 SCLK - - - - P2-9*
16 MOSI 16 13 MOSI - - - - -
17 - - - - - - - - -
18 Analog 18 27 - - - - - P2-1
19 Analog 19 26 - - - - - P2-2
20 Analog 20 25 - - - - - P2-3
21 Analog 21 33 - - - - - P2-4
22 - - - - - - - - -
23 3.3V VCC - 3.3V VCC 3.3V VCC - - 3.3V VCC 3.3V VCC -
24 5V VCC 5V VCC OUT 5V VCC 5V VCC 5V VCC 5V VCC - 5V VCC PX-5 5V VCC
25 GND GND GND GND GND - GND GND PX-8 GND
  • 2nd player Genesis is incompatible with Radio because it uses the same pins, 1 player Genesis is compatible Ω This is optional and only used for dongle detection. On the microcontroller side, put a 1k resistor between DB-25 pin 9 and VCC (3.3v for ESP32, 5V for Micro). On each controller dongle, put a resistor of the given value between DB-25 pin 9 and GND.

All connected pins can also function as Digital pins.

Code and/or inspiration was (or will be) taken from these places, in no particular order: